Conductix-Wampfler USA

812 Series, Anchor Clamp 1P WH GA

The rails are fixed in one place with Anchor Clamps and can expand freely from that point out .The fixed point is mainly for single feed applications attached close to the power feed or in the center of the conductor rail system. If Expansion Units are installed, please refer location in accordance with diagram 3 on page 15. If multiple fixed points are planned, for example at intersections or curves (natural fixed point), the segment between the fixed points must be decoupled using Expansion Units. Clamps are fastened with a clamping cone on the rail insulator.

WH=WITHOUT HANGER CLAMP GA=FASTENERS GALVANIZED

Categories

812 Series, Anchor Clamp 1P WH GA